It is a plastomeric bitumen sheet that provides vapour drainage of the waterproofing system. It is used to ensure the adhesion of the spot bonded membrane to the surface.
It is applied freely without overlapping and bonding. The first layer of the membrane is flame – torch bonded providing melt bitumen penetration through the holes of VOALIT PERFOR. It is spot bonding and the damp reached to the roof structure distributes between the spots and ventilates through the exhaust outlets. This is the way to avoid the forming of air blisters.
|Physical properties||Unit||Test method||Value|
|Mass per unit area of base/reinforcement||g/m2||≥ 60|
|Length||m||BDS EN 1848-1||20|
|Width||m||BDS EN 1848-1||1|
|Diameter of perforation||mm||40|
|Heat resistance at 120°С for 2 h||°С||BDS EN 1110||≥ 120|
|Ring-and-ball softening temperature||°С||BDS 10234 – 87||150|
|Penetration||0,1 mm||BDS 10057 – 83||15 – 25|